Lyckeby Starch AB is a farmer-owned company that produces products based on potato starch. In order to increase their production efficiency and their international competitiveness the company is investigating the possibilities of keeping their factories open longer. To achieve this, potato has to be stored for a longer period of time than what is practiced today. Starch potato is usually stored in large piles covered by straw and plastic, either in the field or on the farmyard. The objective was to examine in what way Starch yield (starch content*tuber weight) in three different potato varieties was affected by storage in two different types of storage piles. The potato was stored for three months in total and starch content and tuber weight were controlled throughout the period. Stored tubers were also visually examined and prescense of mechanical damage as well as wet rots and dry rots was recorded. Bacteria and fungi were isolated and identified. In general, varietal differences were greater than differences between the storage piles.

The high viscosity of barley material makes starch isolation problematical using regular methods established for cereals. An adjusted starch isolation method has been set up for barley, based on fractionation and purification. The focus is on attaining truly representative isolates of six flour samples selected for widely differing characteristics within the research program BarleyFunFood (BFF). Beside establishment of the method, this diploma work aspires to serve the BFF with isolated material of sufficient yield valid for further starch characterisation. A pre study was conducted evaluating available wet mixing equipment, experimental conditions and mode of procedure.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Feed intake in dairy cows is regulated by a variety of factors influencing hunger and satiety. One of the regulation systems includes the short chain fatty acids produced during feed degradation in the rumen. Starch can be digested either in the rumen where short chain fatty acids are produced or in the small intestine where glucose is the end product. Since glucose does not have the same effect on satiety that short chain fatty acids have, the site of starch digestion might be an important factor that affects feed intake and milk production. The aim of this study was to investigate the effects of site of starch digestion on feeding behaviour (feed intake, consumption time, and eating frequency) and milk production. Because feeding behaviour is closely connected to the cows? environment, the study also included observations of behaviour. Three different feed rations were compared.

More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

Dairy cows transform grass to milk with help from ruminal microorganisms that can digest indigestible fiber in their feed. The digestive system of the cow is adapted to a diet consisting of forage and disorders like acidosis, laminitis and abomasal displacement can occur if the feed contains too much starch. To achieve the highest production possible the cow has to be given a high amount of concentrate or grain as the difference in milk yield is significant, approximately 1000 kg energy corrected milk per cow and year between conventional and organic cows that are fed a lower versus a higher share of forage. If the cow shall be able to eat the same amount of energy from forage as from grain or concentrate the eating- and rumination time gets longer and she might not be able to eat enough, which will result in a lower milk yield and will make it harder for the cow to recover from the negative energy balance that originate from the beginning of the lactation. Fat and in a sense protein content differs also depending on if the cow is given a high or low share of forage..

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

Syftet med uppsatsen är att skapa en modell som kan förklara yield spread hos företagsobligationer. För att få en modell som nära återspeglar verkligheten inkluderas både företagsspecifika och makroekonomiska faktorer. Vi utgår från en kvantitativ studie och tillämpat en multipel regression på paneldata innehållande 24 bolag för att förklara yield spread hos företagsobligationer. Den teoretiska referensramen består av forskningsartiklar från främst USA men även Europa som behandlar riskkomponenter hos yield spread. Empirin är kvartalsvis redovisnings- och handelsdata under tidsperioden 2001-2005 som samlas in från finansiella databaser och behandlas med regressioner.

Starch is a naturally occurring substance in most plants and is used as energy storage. It is a component that mainly consists of amylose and amylopectin. Together they build a complex pattern which gives starch its specific properties. The proportion of amylose and amylopectin varies in different plants but generally starch consists of 25 % amylose and 75 % amylopectin. There have been discoveries of barley varieties containing 100 % amylopectin called ?waxy starches? or ?waxy barley? as well as varieties that have a high content of amylose, around 70 % and these are called ?amylotypes?.

The requirements of good quality and appetizing fast food increases continuously as a consequence of a community where food is always available. The crispiness of French fries is an issue that must be considered in this context, since it tends to decrease and give the fries a soft surface not appreciated by the consumer. To prolong the crispiness, the fries can be coated by a batter, a mix of starches. The batters used often consists of modified starches, e.g. cross-linked, acetylated and dextrinizated to increase and prolong crispiness, flour to stabilize the batter and sodium bicarbonate to make the batter ?rise?.The cross-linked starch keeps the granules in a swelled state and prevents them from breaking when exposed to heat or processing: therefore, it delays the gelatinization and decreases the stickiness of the batter.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

The aim of this study was to investigate the relationship between sleep, photoperiod, milk yield and hormones connected to milk formation. Variations of prolactin (PRL) and Insulin-Like growth factor-1 (IGF-1) in plasma were measured during two different light programs. The light programs consisted of either 24 hours of light (L24:D0) or four hours of light and 20 hours of darkness (L4:D20). Five cows of the Swedish Red breed were used in a cross-over experiment and each light program consisted of five days. Milk yield was measured at every milking and milk samples were analyzed with regard to fat, lactose and protein.

Wheat yield depends on the number of ears per m2, the number of kernels per ear and the kernel weight. By knowing the ability of different cultivars to compensate for the different yield components and knowing which yield component that is the most important for the final yield, the farmer can match the cultivar and management to the location. The objective of the study was to investigate how the yield components of winter wheat vary depending on genotype, environment, sowing density and date of sowing.Seven varieties were grown in four locations in Sweden with three different sowing densities and with an early and a late sowing date. On each experimental site, the surviving plants after winter were counted, as well as the number of shoots at early and late spring and the number of ears. Ten ears from each site were cut at three different occasions, starting from the time of blooming, with 200 day degrees between each cut.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.